These loads bring out the full potential of the 10MM but operate at standard pressures and as such, are safe to use in any standard 10MM pistol. Please don’t phone us and ask if these loads are safe in your 10MM – THEY ARE SAFE–provided your 10MM is a normal operating pistol in good condition.
We are using flash-suppressed powders so your vision will not be materially affected should you be required to drop the hammer in low light.
If you are firing this 10MM ammo from an autoloader and experience high extreme spreads in velocity, it is not the ammo. Here is why and how to remedy the situation.
FULL POWER 10MM AMMO:
Full power 10MM ammo has always generated enough recoil and pressure to require a pretty stiff recoil spring in your handgun – this, of course, depends on several variables such as your slide weight, etc. When the cartridge fires, it generates enough pressure/recoil to prematurely open your breech face in some guns. When this happens, the opening breech face has an effect on the burn rate of the powder. This can result in some fairly high extreme spreads in velocity. If you are experiencing extreme velocity spreads of more than 50 fps, simply install a stiffer recoil spring.
Technical Information:
- Caliber: 10mm Auto
- Bullet Weight: 180 Grains
- Bullet Style: Jacketed Hollow Point
- Case Type: Brass
Ballistics Information:
- 1,311 fps – Glock model 20 – 4.6-inch barrel
- 1,337 fps – Colt Delta Elite – 5-inch barrel
- 1,351 fps – Para Ordinance 1911 with Nowlin – 5-inch barrel
- Muzzle Energy: +-728 ft. lbs.
Reviews
There are no reviews yet.