The ALG Defense ALG Combat Trigger (ACT) is an enhanced Mil-Spec type AR-15 trigger. The ACT is very similar to Mil-Spec units in pull weight, but the polished surfaces and hard-lubing result in a smoother pull with a sharper break. The pull weight is 6.0 pounds, which falls within the Military specifications of 5.5 to 9.0 pounds. The Mil-Spec pull weight makes this trigger perfect for users who want all of the rugged reliability of a standard trigger combined with the added benefits of an improved pull and a sharp, clean break. The trigger and hammer are 8620 steel alloy and the disconnector is 1070 high-carbon steel, all tempered and hardened to Military Specifications. The included pins are 4140 tempered chrome moly steel that is centerless ground to 0.001″ larger than stock for an improved fit within the lower receiver, while still remaining slip-fit and field serviceable. The tempering of the pins keeps debris from imbedding into them and wearing on the lower pin holes which can occur with softer pins. The springs used with the ACT are full power to maintain positive ignition with all types of ammunition.
The hard lube coating used on the ACT triggers is a modified electroless nickel plating with a Boron or Teflon additive. This modified coating improves surface hardness, wear resistance, and corrosion resistance. Testing shows that the electroless nickel coating improves the single stage pull. The trigger components are coated with Nickel Boron for its surface hardness and wear resistance, while the hammer, disconnector and pins are coated with Nickel Teflon for the low friction coefficient. The specific coatings of each part contribute to the improved feel and durability of the ALG Combat Trigger.
Technical Information:
- Meets U.S. Military Specifications for the M4 Carbine
- Average Pull Weight of 6.0 Pounds
- Trigger is Nickel Boron Plated
- Hammer, Disconnector, & Pins are Nickel Teflon Plated
- Full Power Hammer Spring for Reliable Ignition
SKU: 93504
SKU: 95503
Reviews
There are no reviews yet.